elise-shop.com Aluminium Bell Brake Discs (pair)

We have chosen to design our own disc rotors rather than using an existing casting which needs to be re-machined to make it work for Elise & Exige S1 applications.

Doing our own design meant we could further optimize weight and we were able to implement the optimal internal vane design for this application.
This results in better cooling. The vanes are handed of course, so rather than just an optical feature, these are proper handed discs with correct airflow on both sides.

These discs weigh 4.75kg each which means a reduction of nearly 13% of unsprung weight!

We have chosen to have the aircraft grade aluminium bells anodised in silver to create a more OE-like look. Apart from that, silver absorbs less heat.. every little bit helps!
The bell design also improves airflow, which again means better cooling. All discs supplied have been torqued up using the correct torquing procedure.

Dimensions of the friction surface, diameter, thickness and offset of the discs are equal to the original brake disc design on an Elise or Exige S1. There’s no need to make any modification to use these discs.
The material we’ve chosen for this is a fast road and trackday compound. We have not chosen to use an AP Racing like compound as that would force the price up considerably and after all, AP Racing discs are readily available for race applications.

When these discs are worn, you don’t need to replace the complete kit, you can stick to replacing the rotors only.

For the S1, you can choose either the 111s style cross drilled brake rotors or a grooved discs.

Price for an axle set (two discs)

We have noticed that some Victory (Sports 160) wheels are slightly out of tolerance which makes them wider than the dish inside the disc bell. To overcome this and to make sure the wheels can be fitted correctly you can add these spacers, which will create a flat surface (and space the wheel out by 3mm)